EEPROMMER BY SUPERFRO, MODDED BY ALWAYSONJOHN (www.xboxhackz.com/forums)

Forward. Superfro created a great program. only one problem.  won't boot on Xbox's that screwed up their EEPROM flashing to the damn blank bin (PiXEL8-blank_serial_eeprom.bin).  After screwing around i changed to a working one. just follow these directions.

1. Flash your bios using the included bios. It is the Complex 1.03 Debug bios. This should work on any lpc 1MB mod-chip (i use pc-bioxx), homebrew has not been tested.
2. Download Evox (i can't tell you where!)
3. Include the EEPRO folder inside the EvolutionX folder and link to it.
Remember when linking it will be on the D drive. so add this line to evox.ini

	Item "EEpro","d:\eepro\EEPROMagic.xbe"

4.  Burn using gdfimage.exe (again illegal) to make an iso and Nero to burn.
5.  Place the CDRW inside your Xbox.  THe screen should freeze, don't worry.
6.  Turn xbox off, then on, and Evox should load.
7.  Run eepro.  press B, then hold both trigger then hit b.
8.  keep doing the above over and over again and you will see a confirmation after a while with luck.
9.  Eject cd, and you are done!

liked this, join my website (which is free, duh), just e-mail me at platte@bellsouth.net

Thanks superfro for the program.