
   _  __ __         _  __    __  ______     __  ___      __            
  | |/ // /_  ____ | |/ /   / / / / __ \   /  |/  /___ _/ /_____  _____
  |   // __ \/ __ \|   /   / /_/ / / / /  / /|_/ / __ `/ //_/ _ \/ ___/
 /   |/ /_/ / /_/ /   |   / __  / /_/ /  / /  / / /_/ / ,< /  __/ /    
/_/|_/_.___/\____/_/|_|  /_/ /_/_____/  /_/  /_/\__,_/_/|_|\___/_/     
                                                                       
                                          __
                         ____ _____  ____/ /
                        / __ `/ __ \/ __  / 
                       / /_/ / / / / /_/ /  
                       \__,_/_/ /_/\__,_/   
                     
                                                 __              __
   ________  _________ _   _____  _______  __   / /_____  ____  / /
  / ___/ _ \/ ___/ __ \ | / / _ \/ ___/ / / /  / __/ __ \/ __ \/ / 
 / /  /  __/ /__/ /_/ / |/ /  __/ /  / /_/ /  / /_/ /_/ / /_/ / /  
/_/   \___/\___/\____/|___/\___/_/   \__, /   \__/\____/\____/_/   
                                    /____/                         

This explains howto build a burnable iso from this distribution.
For information on howto use the xbox HD builder script read the readme.txt
in the linux directory.

The xbox HD builder script (xboxhd) needs the xbox C-, and E-drive files. 
You can supply the script with these files in two ways :
You can either :
- burn a seperate CDROM with two folders containing the
  xbox C-, and E-drive respectively, or
- Put the xbox C- and E-drive files in the C and E folders
  in linux directory before making the burnable iso.


BUILDING THE ISO.
In windows upon a 'Command prompt' and navigate to this directory.
Run the following command :
> make-iso-win.bat

In linux navigate to this directory and execute :
> make-iso-lin.sh

This should produce a file called linux.iso that you must now burn 
to blank CDROM. It's important that you burn this raw image and don't
create a Data CDROM containing this image...

UNLOCK/LOCK TOOLS.
If you need to lock or unlock xbox HD's use also have two options :

1) Boot the CDROM an choose option 3) at the boot prompt. This will 
   bring you to a DOS prompt with the unlockx, hdlock, hdunlock, hddisabl
   utilities. However as the CDROM is read-only on log files can be saved 
   so you will be prompted the used passwd when a HD is locked. Write this
   down in case the passwd later turns out to be incorrect. You can also insert
   a fat-formatted floppy and run the save-logs command to save the used passwd's 
   onto floppy
2) If you have a floppy-drive you can create a DOS-floppy with all nessecary
   HD tools by running the make-DOS-floppy.bat script in a command-prompt. 
   Running the HD lock/unlock tools from a floppy the log-files with used 
   passwd's will automatically be saved.

Good luck - and remember to read the readme.txt before using this tool!
ldots.
